Ready to get started?
Inspection of airfoils and any kind of turbine blades. Blade specific evaluations such as leading and trailing edge, radius, centerline, max. inscribed diameter. Requires the option QUINDOS Curves.
QUINDOS Thread / API
External and internal threads, with single or multiple starts. The threads can be of cylindrical or conical (tapered) shape. Evaluation of lead, mean diameter, pitch, profile angle etc. Includes the inspection of API threads and gauges.
Measurement of Cams and Camshafts, based on nominal data "Angle over Stroke" on a coordinate measuring machine (other types of data can be converted). For any kind of follower. Output of Stroke error charts. Computing of stroke, velocity and acceleration over angle. Requires the option QUINDOS Curves.
QUINDOS Complementary Cams
Measurement and calculation of the complementarity errors of a pair of cams. Optimizing of several parametesr to minimize complementarity error. Requires the option QUINDOS Curves.
QUINDOS Valve Guides and Seats
Automatic generation and measuring of all probing points and scan lines for valve seats with minimum 2 cone angles. With valve specific evaluations and plots. Requires the option QUINDOS Curves. For Coordinate Measuring Machines with scanning capability only!
QUINDOS Ovality of Pistons
For inspection of pistons of internal combustion engines with single, double or triple ovality. A coordinate measuring machine with High-Speed-Scanning is recommended for these measurements.
QUINDOS Screw Compressor
Inspection of transverse or axial sections of Screw Rotors. Actual-nominal comparison of the contour, with best fit. Evaluation of lead, pitch, root and tip circle etc. Requires the option QUINDOS Curves.
QUINDOS Step Gear
Inspection of the profiles of step gears (roller gears) with cylindrical or globoid shaped carriers. The surface geometry is calculated from the transmission law. Surface deviations, slot width, actual transmission law and contact pattern are evaluated. Requires the option QUINDOS Curves.
QUINDOS Connecting Rod
Generation of measurement programs for the measurement of connecting rods based on design data.
Measurement and evaluation of type P3G polygons according to DIN 32711 and of type P4C polygons according to DIN 32712.
QUINDOS Constant Velocity Joints
Generation of measurement programs for the measurement of CV joints based on design parameters.