Free ALPHACAM Licence Helps Codem Produce Urgent PPE and Blackman & White MD gives up weekends to personally cut NHS scrubs
A free evaluation licence from ALPHACAM meant that a manufacturer could put a machine tool that hadn’t been fully commissioned and was standing idle during the Coronavirus crisis, to work producing essential PPE for front line health workers.
Codem Composites had recently invested in a previously-owned Blackman & White CNC machine with a bed capacity of 2.2 square metres, for cutting carbon-fibre pre-impregnated with an epoxy resin, to make components for the motor sport industry and satellite dishes.
Codem Composites had recently invested in a previously-owned Blackman & White CNC machine with a bed capacity of 2.2 square metres, for cutting carbon-fibre pre-impregnated with an epoxy resin, to make components for the motor sport industry and satellite dishes.
“It hadn’t been fully commissioned, and we had post-processing issues with the software and interface. We didn’t want to invest several thousand pounds in software immediately, given the uncertainty brought about by Coronavirus,” explains Managing Director Kevin Doherty. “But when we got the call asking for help in cutting NHS scrubs, we approached ALPHACAM, which is part of the Hexagon group, to help us get the machine up and running.
“We have a good working relationship with Hexagon, as we’ve used one of their portable CMM arms for collecting surface geometry measurements of our products since 2018. “We’d already discussed switching our CAD/CAM to products from Hexagon Manufacturing Intelligence’s production software portfolio when we need to review our existing licences, and are also in the early stages of looking at investing in an ERP system from them.
“ALPHACAM supported us by giving a free evaluation licence for us to cut the scrubs.”
The software gave them complete flexibility and speed of production, by optimising nests. “A full scrub comprises several components, and comes in a variety of sizes, ranging from small to double XL. The tunic is made from a front, back, sleeves, collar, V at the front, and a couple of pockets. Trousers are a left and right leg both front and back, two standard pockets on the side and a patch pocket on the back. To utilise the material properly and avoid waste, we may nest a number of left legs, for example, together with tunic fronts or collars and sleeves.”
Running at a capacity of around 500 full scrubs a week, the Blackman & White machine cuts components for a group of volunteers in Northamptonshire to put together. “Previously, they’d been cutting them by hand, so with us taking on the cutting they can now spend more time sewing.”
Kevin Doherty says ALPHACAM accurately interrogated the DXF file for each of the patterns, and computed all permutations and variables. “So rather than someone having to work everything out manually, such as what we were going to cut, how we were going to cut it, and what’s got to go where”
It comes as no surprise to the Managing Director of Blackman & White that Kevin Doherty found ALPHACAM to be the perfect software for their machine. “It’s a highly cost effective and productive tool,” says Alex White. “We match it up with our machines regularly when we’re assembling them, and offer it as part of an overall package for our customers.”
Blackman & White have been established for more than 50 years, and promote themselves as being the only UK manufacturer of multi-purpose industrial cutting equipment that can be used for routing, knife-cutting and laser cutting across a wide range of substrates.
Alex White says many of their customers found the COVID-19 crisis meant there was no longer an immediate requirement for the products they were cutting, and turned their hand to manufacturing PPE for the NHS. “We’ve been supporting our customers with opportunities for the right tooling and programs for their machines to be able to cut visors, gowns and scrubs.”
That even extends to publishing a variety of ALPHACAM files on their website for customers cutting NHS scrubs, which came about after Alex White gave up his weekends to personally cut around 300 sets of PPE.
Although the company doesn’t undertake contract cutting, they have their Genesis-V model on show in the demonstration area of their factory at Maldon in Essex. The machine supports laser and knife cutting, and also carries a router for rigid and thin metals, along with wood.
While it would normally be used for cutting a variety of materials such as carbon fibre pre-preg composite, it was perfect for adapting to the needs of specialist PPE scrubs. “As I carried this work out personally, I learned to generate ALPHACAM files which cut these components perfectly. We made these DXF files free on our website for anyone with spare capacity on their cutting machines to manufacture this much-needed PPE. Several customers are using them.”
He sums up why Blackman & White offer ALPHACAM as part of a package with their machine tools wherever appropriate. “It’s absolutely perfect for many of our customers. ALPHACAM has powerful CAD tools for digitising parts or templates to generate the outer profile from a scanned image. This is then turned into a smooth contour with the correct profile to meet the needs of the application, before collecting the individual components together that comprise the complete assembly, and laying everything out on the material in the most efficient way. ALPHACAM’s powerful set of nesting tools generate an efficient nest which makes the cutting of material both cost-effective and fast.”
About the Company
Name: Carbolite Gero Ltd
Business: Codem Composites, Blackman & White
Web: www.codemcomposites.com, blackmanandwhite.com
Key benefits achieved
- CNC Machine standing idle was put to use, manufacturing essential scrubs for front line health workers
- Complete flexibility and speed of production by optimising nests of multiple components
- Software files available free for Blackman & White customers to cut PPE for NHS and health workers