Intergraph Smart P&ID 설계 검증
Intergraph Smart P&ID Design Validation Product Sheet
Choose Intergraph Smart P&ID Design Validation to check SmartPlant Isometrics, ISOGEN-generated isometrics, or PDMS 3D models against your Smart P&ID logical design.

시작할 준비가 되셨나요?
전문가와 상담해 보고 헥사곤이 귀사에 어떤 도움을 줄 수 있는지 알아보세요.
Intergraph Smart® P&ID Design Validation은 반복적인 파이프 시스템 확인 워크플로 속도를 높여 논리적 및 물리적 파이프 설계의 일관성을 검사합니다. Design Validation은 Intergraph Smart P&ID 및 SmartPlant® Isometrics(PCF, POD), ISOGEN® 생성 등척/도면(IDF, PCF) 및 PDMS 모델 사이의 비교를 간소화합니다.
예를 들어 현장에서 검사한 등척 간 빠른 비교 시 토폴로지 비일관성이 나타날 수 있으며, 이는 P&ID의 브랜치에서 잘못된 쪽에 값이 존재하기 때문입니다. 이후 Smart 엔지니어링 작업을 사용하여 P&ID를 업데이트하면 최종 상황을 반영하게 됩니다.
예를 들어 현장에서 검사한 등척 간 빠른 비교 시 토폴로지 비일관성이 나타날 수 있으며, 이는 P&ID의 브랜치에서 잘못된 쪽에 값이 존재하기 때문입니다. 이후 Smart 엔지니어링 작업을 사용하여 P&ID를 업데이트하면 최종 상황을 반영하게 됩니다.
Consistency
Facilitate As-Built between logical and physical designs. Improved consistency through rule-driven, intelligent graphical comparison.
Plant Safety
Make sure the designs are consistent to perform safety studies.
Reduce Risk
Plan maintenance and modification through synchronized engineering dataset.
Reduce Costs
Reduced labor by decreasing the number of iterative cycles.
Productivity
Make the right decision at the right time.
Design Consistency/Quality
Allows easy comparison of P&IDs (logical world) and isometrics, 3D models (physical world) at the data and topology levels.
Consistency
Facilitate As-Built between logical and physical designs. Improved consistency through rule-driven, intelligent graphical comparison.
Plant Safety
Make sure the designs are consistent to perform safety studies.
Reduce Risk
Plan maintenance and modification through synchronized engineering dataset.
Reduce Costs
Reduced labor by decreasing the number of iterative cycles.
Productivity
Make the right decision at the right time.
Design Consistency/Quality
Allows easy comparison of P&IDs (logical world) and isometrics, 3D models (physical world) at the data and topology levels.
Consistency
Facilitate As-Built between logical and physical designs. Improved consistency through rule-driven, intelligent graphical comparison.
Plant Safety
Make sure the designs are consistent to perform safety studies.
Reduce Risk
Plan maintenance and modification through synchronized engineering dataset.
Reduce Risk
Plan maintenance and modification through synchronized engineering dataset.
Reduce Costs
Reduced labor by decreasing the number of iterative cycles.
Productivity
Make the right decision at the right time.
Design Consistency/Quality
Allows easy comparison of P&IDs (logical world) and isometrics, 3D models (physical world) at the data and topology levels.
Consistency
Facilitate As-Built between logical and physical designs. Improved consistency through rule-driven, intelligent graphical comparison.
Plant Safety
Make sure the designs are consistent to perform safety studies.
Reduce Risk
Plan maintenance and modification through synchronized engineering dataset.
Reduce Costs
Reduced labor by decreasing the number of iterative cycles.
Productivity
Make the right decision at the right time.
Design Consistency/Quality
Allows easy comparison of P&IDs (logical world) and isometrics, 3D models (physical world) at the data and topology levels.
Consistency
Facilitate As-Built between logical and physical designs. Improved consistency through rule-driven, intelligent graphical comparison.
Plant Safety
Make sure the designs are consistent to perform safety studies.
Reduce Risk
Plan maintenance and modification through synchronized engineering dataset.
Reduce Work
Reduce checking cost during project executions. The P&ID can be checked against the 3D design and the isometrics to ensure design consistency and reduce change order when the isometrics are issued to the fabricator.
Highlight Inconsistencies
Both data as well as graphical identification of the inconsistency. The tool will show side-by-side data that is inconsistent.
Manage Inconsistencies
Within the tool there is a note pad capabilities to document the actions and by whom to resolve the inconsistencies.
Side-by-side Comparison
Compare logical and physical designs. Side-by-side comparison for example the P&ID and the isometric showing the difference in data as well as in topology.
Automatic Reporting
Automatic reporting on differences in 2D and 3D. The tool will automatically create a word document with descriptions of the difference and screen shots of the P&ID and the 3D isometric with the highlited inconsistencies.
Reduce Cost on Plant Maintenance
The comparison will make sure that in case of maintenance and or turn around projects there will be no suprises when the planning is done on P&ID and find different configurations in the actual plant.
Reduce Work
Reduce checking cost during project executions. The P&ID can be checked against the 3D design and the isometrics to ensure design consistency and reduce change order when the isometrics are issued to the fabricator.
Highlight Inconsistencies
Both data as well as graphical identification of the inconsistency. The tool will show side-by-side data that is inconsistent.
Manage Inconsistencies
Within the tool there is a note pad capabilities to document the actions and by whom to resolve the inconsistencies.
Side-by-side Comparison
Compare logical and physical designs. Side-by-side comparison for example the P&ID and the isometric showing the difference in data as well as in topology.
Automatic Reporting
Automatic reporting on differences in 2D and 3D. The tool will automatically create a word document with descriptions of the difference and screen shots of the P&ID and the 3D isometric with the highlited inconsistencies.
Reduce Cost on Plant Maintenance
The comparison will make sure that in case of maintenance and or turn around projects there will be no suprises when the planning is done on P&ID and find different configurations in the actual plant.
Reduce Work
Reduce checking cost during project executions. The P&ID can be checked against the 3D design and the isometrics to ensure design consistency and reduce change order when the isometrics are issued to the fabricator.
Highlight Inconsistencies
Both data as well as graphical identification of the inconsistency. The tool will show side-by-side data that is inconsistent.
Manage Inconsistencies
Within the tool there is a note pad capabilities to document the actions and by whom to resolve the inconsistencies.
Manage Inconsistencies
Within the tool there is a note pad capabilities to document the actions and by whom to resolve the inconsistencies.
Side-by-side Comparison
Compare logical and physical designs. Side-by-side comparison for example the P&ID and the isometric showing the difference in data as well as in topology.
Automatic Reporting
Automatic reporting on differences in 2D and 3D. The tool will automatically create a word document with descriptions of the difference and screen shots of the P&ID and the 3D isometric with the highlited inconsistencies.
Reduce Cost on Plant Maintenance
The comparison will make sure that in case of maintenance and or turn around projects there will be no suprises when the planning is done on P&ID and find different configurations in the actual plant.
Reduce Work
Reduce checking cost during project executions. The P&ID can be checked against the 3D design and the isometrics to ensure design consistency and reduce change order when the isometrics are issued to the fabricator.
Highlight Inconsistencies
Both data as well as graphical identification of the inconsistency. The tool will show side-by-side data that is inconsistent.
Manage Inconsistencies
Within the tool there is a note pad capabilities to document the actions and by whom to resolve the inconsistencies.
Side-by-side Comparison
Compare logical and physical designs. Side-by-side comparison for example the P&ID and the isometric showing the difference in data as well as in topology.
Automatic Reporting
Automatic reporting on differences in 2D and 3D. The tool will automatically create a word document with descriptions of the difference and screen shots of the P&ID and the 3D isometric with the highlited inconsistencies.
Reduce Cost on Plant Maintenance
The comparison will make sure that in case of maintenance and or turn around projects there will be no suprises when the planning is done on P&ID and find different configurations in the actual plant.
Reduce Work
Reduce checking cost during project executions. The P&ID can be checked against the 3D design and the isometrics to ensure design consistency and reduce change order when the isometrics are issued to the fabricator.
Highlight Inconsistencies
Both data as well as graphical identification of the inconsistency. The tool will show side-by-side data that is inconsistent.
Manage Inconsistencies
Within the tool there is a note pad capabilities to document the actions and by whom to resolve the inconsistencies.
Intergraph Smart P&ID
Intergraph Smart P&ID는 플랜트 자산에 중점을 두고 배관 및 계측 다이어그램을 개발하고 관리하는 데 도움이 됩니다.