警告
Intergraph Smart P&ID Design Validation
Intergraph Smart P&ID Design Validation Product Sheet
Choose Intergraph Smart P&ID Design Validation to check SmartPlant Isometrics, ISOGEN-generated isometrics, or PDMS 3D models against your Smart P&ID logical design.
準備はいいですか？
Hexagonが組織にどのような利点をもたらすか、専門家にご相談ください。
Intergraph Smart® P&ID Design Validation、論理的な配管設計と物理的な配管設計の一貫性をチェックし、配管システム検証の反復的なワークフローを高速化します。 Design Validationは、Intergraph Smart P&ID と SmartPlant® Isometrics (PCF、 POD)、 Isogen®で生成されたアイソメトリック/ドローイング (IDF、PCF)、PDMSモデルとの比較を合理化します。
例えば、現場で確認したアイソメトリック図をすぐに比較してみると、P&IDの分岐の反対側にバルブが存在するなど、トポロジーの不整合が見られることがあります。 その後、スマートエンジニアリングタスクを使用してP&IDを更新し、As-Builtの状況を反映させることができます。
例えば、現場で確認したアイソメトリック図をすぐに比較してみると、P&IDの分岐の反対側にバルブが存在するなど、トポロジーの不整合が見られることがあります。 その後、スマートエンジニアリングタスクを使用してP&IDを更新し、As-Builtの状況を反映させることができます。
Reduce Costs
Reduced labor by decreasing the number of iterative cycles.
Productivity
Make the right decision at the right time.
Design Consistency/Quality
Allows easy comparison of P&IDs (logical world) and isometrics, 3D models (physical world) at the data and topology levels.
Consistency
Facilitate As-Built between logical and physical designs. Improved consistency through rule-driven, intelligent graphical comparison.
Plant Safety
Make sure the designs are consistent to perform safety studies.
Reduce Risk
Plan maintenance and modification through synchronized engineering dataset.
Side-by-side Comparison
Compare logical and physical designs. Side-by-side comparison for example the P&ID and the isometric showing the difference in data as well as in topology.
Automatic Reporting
Automatic reporting on differences in 2D and 3D. The tool will automatically create a word document with descriptions of the difference and screen shots of the P&ID and the 3D isometric with the highlited inconsistencies.
Reduce Cost on Plant Maintenance
The comparison will make sure that in case of maintenance and or turn around projects there will be no suprises when the planning is done on P&ID and find different configurations in the actual plant.
Reduce Work
Reduce checking cost during project executions. The P&ID can be checked against the 3D design and the isometrics to ensure design consistency and reduce change order when the isometrics are issued to the fabricator.
Highlight Inconsistencies
Both data as well as graphical identification of the inconsistency. The tool will show side-by-side data that is inconsistent.
Manage Inconsistencies
Within the tool there is a note pad capabilities to document the actions and by whom to resolve the inconsistencies.
