DPA Entry
エントリーレベルのフォトグラメトリー
さらに詳しく
DPA Series のDPA Entry は、フォトグラメトリーの原理に精通しており、カメラ設定を含む全ての測定プロセスを完全に管理できるエキスパートを対象としたシステムです。
他の DPA Series と同様に、DPA Entry システムのパフォーマンスは、DPA Pilot ソフトウェアプラットフォームの完全な機能をベースにしています。ターゲットの選択と高精細カメラの品質により、DPA Entry は比較的シンプルな部品の分析を行う幅広いアプリケーションに十分な精度を提供します。
製品特長
ミドルレンジカメラユニット
20 メガピクセルのデジタルカメラユニット
高い測定精度
DPA Entry は、15 ㎛以下の測定精度を実現
フルコントロール
すべての複雑なカメラ設定を、エンドユーザーが直接コントロール
測定アクセサリ
シンプルな部品測定用に設計された測定ターゲットとスケールバーの基本セット
幅広い互換性
主要な計測ソフトウェアパッケージとの現代的で使いやすいインターフェース
-
The DPA Series
Handheld photogrammetry
When it comes to shop-floor measurement processes, it’s important to have a simple workflow that’s as immune as possible to user error and the hazards of an industrial environment. That’s why the DPA Series photogrammetry systems have been designed to deliver user-friendly measurement and processing in every situation.
Relying on just a single handheld camera unit backed by a dedicated software platform, DPA Series systems are among the most portable measurement systems in the world, without compromising on metrology-grade accuracy delivered at productivity-enhancing speed.
DPA Series systems are available in three configurations that allow the user to tailor their experience to the needs of their applications. Each system runs on the same advanced DPA Pilot software platform – the foundation of the leading measurement functionality of the DPA Series.
DPA Industrial
- High-end industrial sensor - 50.6 megapixels
- Simplified control schema minimises operating errors during measuring tasks
- Full range of measurement targets, adaptors and scale bars
DPA Professional
- High-end sensor - 30.3 megapixels
- Full control of all camera settings directly in the hands of the end-user
- Extended range of measurement targets, adaptors and scale bars
DPA Entry
- Mid-range sensor unit
- Full control of all camera settings directly in the hands of the end-user
- Basic range of measurement targets and scale bars
-
Introduction to photogrammetry
How digital photogrammetric analysis works
The DPA Series systems are portable 3D measuring tools that use a high-resolution digital camera for data collection. They are based on the principles of digital photogrammetric analysis. Measurement with a photogrammetric system involves the following four key steps.
1. Signalising
To measure a part, it is first signalised with a selection of targets. Coverage of hidden points or features such as holes and edges is ensured with the use of appropriate target adaptors.
2. Capturing
The part is then photographed from several directions, with the targets in view and overlapping between shots.
3. Calculating
The images produced are processed either simultaneously with data collection (online processing) or after data collection (offline processing) through a dedicated photogrammetry software tool like DPA Pilot. The software automatically calculates the 3D coordinates of all targeted points.
The calculation is based on the principle of spatial image triangulation and is fully automated. With software that employs an integrated simultaneous calibration procedure, the highest levels of accuracy can be achieved onsite during the measurement process.
4. Reporting
In addition to 3D coordinates, quality photogrammetry software such as DPA Pilot can provide statistical analysis of the results with specific accuracy information about each coordinate. This allows for instant evaluation of the quality of the measurement.
DPA Pilot is also very deeply integrated into the best inspection software packages and allows complete automations of calculation steps and advanced analyses.
-
Customer stories
-
Downloads
