HP-THDe Touch Trigger Probe

Excellent repeatability and 3D performance with styli lengths up to 100 mm
The HP-THDe touch trigger probe is recommended for applications with tight tolerance and those that require a high level of point density and high-speed measurement. It is also suited to applications that require long styli builds. 

Adaptive triggering
Unlike other systems on the market, HP-THDe has an adaptive trigger than can be controlled by the measuring software and machine controller. The trigger parameters are automatically adjusted when loading a new stylus build, ensuring optimal measuring performance at all times.

Enhanced productivity
The HP-THDe benefits from a fast stylus change and increased module life compared to a typical touch trigger probe, therefore productivity is enhanced saving both time and cost.

Robustness
The HP-THDe has been designed to be as robust as a standard touch trigger probe, reducing downtime and cost of ownership.

	HP-THDe-SF (Standard Force)	HP-THDe-MF (Medium Force)	HP-THDe-EF (Extended Force)
Weight (Body and module)	21.8g
Mounting	M8 with active 1 wire connection
Module changer rack	HR-P / HR-MP
Suitable interface	HH-C-V2.1 or higher
Max. probe head extension	750 mm (HH-A-H2.5) 450 mm (HH-A-T2.5) 300 mm (HH-A-T5 or HH-A-T7.5) 200 mm (HH-A-M5 or HH-A-M7.5)
Probing direction	6 Way ±X, ±Y and ±Z
Stylus mounting	M2 thread
Max. straight styli length	30 mm	50 mm (75 mm CF)	75 (100 mm CF)
Max. star styli  dimensions*1	N/A	A (Length): 40 mm B (Extension): 20 mm C (Span): 15 mm	A (Length): 50 mm B (Extension): 20 mm C (Span): 30 mm

Measuring Performance

^{*2 Test conditions: Straight stylus, Touch speed 5 mm/sec.}